For Frog Hybrid sizes 40 through to 48.
Mudguards can be fiddly but fear not, these instructions will guide you through the process and we are always on hand to help. Before we begin we need to collect the parts pictured below:
Front mudguard fitting
Place the mudguard between the fork legs, ensure one metal tab is placed in front of the fork and one metal tab behind the fork. Make sure the shorter end of the mudguard is pointing forward.
Use the long Philips bolt to fix the mudguard onto the fork leg, make sure there is a washer in front of each metal tab as shown above. Ensuring that the mudguard is positioned centrally and that there is sufficient clearance between the mudguard and the tyre, tighten the bolt using a 10mm spanner and a Phillips screwdriver.
Rear mudguard fitting
Place the rear mudguard between the stays as pictured above.
Use the short Phillips bolt to fix the mudguard onto the strut connecting the two seat stays. Make sure there is a washer between the metal tab and lock nut and between the metal tab and the head of the bolt.
Ensuring that the mudguard is positioned centrally and that there is sufficient clearance between the mudguard and tyre, tighten the bolt using a 10mm spanner and a Phillips screwdriver.
This completes your mudguard setup!